Owner's Manual

ADS-RR(SR)-FOC1-DS-IG-EN maestro.idatalink.com
Ford Focus with 8" MyFord touch screen and sony audio systeM 2012-2014
Automotive Data Solutions Inc. © 2019
5
Fig. 2.2
Fig. 2.4Fig. 2.3
Fig. 2.1
Fig. 3.2Fig. 3.1
INSTALLATION INSTRUCTIONS
MAKE CONNECTIONS (refer to wiring diagram)
1. Locate the aftermarket radio’s main harness. Connect
the wires from the aftermarket radio’s main harness to
the FOC1 t-harness and match the wire functions (refer to
diagram).
2. Assemble and connect the FOC1 T-harness to the factory
radio harness. Plug the backup camera cable into the
factory harness (if applicable).
3. Connect all harnesses to the Maestro RR module.
4. Plug the aftermarket radio harnesses into the aftermarket
radio. Plug the data cable to the data port of the
aftermarket radio (port labeled iDatalink). Plug the gray
and white speaker RCA inputs. Plug the backup camera
RCA into the aftermarket radio (if applicable).
Note: When using a Pioneer radio, please ensure that there
is nothing plugged into the W/R port of the radio.
5. Insert the radio into the dash and secure the metal
brackets with (4) T25 screws. (Fig. 3.1)
6. Connect all the harnesses to the FOC1 kit, and secure it
in the dash. Test your installation before completely re-
assembling the bezel to the vehicle. (Fig. 3.2)
2