Owner's Manual

ADS-RR(SR)-FOC1-DS-IG-EN maestro.idatalink.com
Ford Focus with 8" MyFord touch screen and base audio systeM 2012-2014
Automotive Data Solutions Inc. © 2019
4
Fig. 2.2
Fig. 2.4Fig. 2.3
Fig. 2.1
Fig. 3.2Fig. 3.1
INSTALLATION INSTRUCTIONS
DASH KIT ASSEMBLY
1. Attach the pocket of the FOC1 to the bezel using the four (4)
provided screws. (Fig. 2.1)
NOTE: If the pocket sticks when opening or closing, you
can adjust the fi t by loosening the screws that secure the
pocket by 1/4 turn until the pocket no longer sticks.
2. Install the combination hazard/lock switch into the FOC1
bezel (the other hazard switch is not used). (Fig. 2.2)
NOTE: If the hazard button squeaks when you press it, pop
the hazard switch out of the kit and then re-install it. This
should eliminate the noise.
3. Install the factory vents on the FOC1 kit. (Fig. 2.3)
4. Install the metal brackets on to the aftermarket radio. (Fig.
2.4)
3