Owner's Manual

ADS-RR(SR)-CHK1-DS-IG-EN maestro.idatalink.com
Jeep Cherokee 2014-2018
Automotive Data Solutions Inc. © 2019
5
INSTALLATION INSTRUCTIONS
• Insert the Audio cable into the iDatalink 3.5 mm audio jack
of the aftermarket radio (If there is no iDatalink audio input,
connect to AUX).
Note: On Pioneer radio, ensure that there is nothing
plugged into the W/R port.
• Plug mini USB cable to short USB adapter then connect
adapter to aftermarket radio.
• Plug long USB adapter to aftermarket radio.
Note: If the vehicle is equipped with parking sensors AND
using an Alpine radio: plug Audio cable in auxiliary input
of the radio.
STEP 18
• Connect all the harnesses to the Maestro RR module.
• If the vehicle is equipped with OEM parking assist, lane
departure, or other safety systems, the ACC-SP1 is
required: Plug the ACC-SP1 the Maestro RR.
If you are not using this speaker, the radio will mute when
the parking assist is active. If you are using this speaker,
the parking assist chimes will play through the external
speaker and the radio will not mute unless the settings are
changed in the radio.
STEP 19
• Install the CHK1 dash kit and test your installation.
1