Owner's Manual

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016
5
KENRRSRTOY01DSOGEN
USING MAESTRO FEATURES - VEHICLE INFO
USING MAESTRO
FEATURES 
VEHICLE INFO
Maestro features can be accessed
in the My Car submenu. If an icon is
not active (gray color) then it is not
available in your vehicle or it was
disabled when the Maestro module
was programmed using Weblink.
The options described here may not
be available in your vehicle.
HOW TO GET THERE:
VEHICLE INFORMATION
Access And Display Vehicle Info Screen
In the My Car submenu, press on Vehicle
Info to display information about the vehicle
such as tire pressure, battery voltage and
open entry points. If your vehicle is equipped
with a compatible tire pressure monitoring
system (TPMS), the digital tire pressures will
be displayed for each tire. Should your check
engine light come on, the CHECK ENGINE
button will become active and you will be able to press this button to see the active trouble
codes and attempt to reset them.
NOTES:
The system will attempt to reset engine trouble codes when you press the Reset button However, this will not correct a persistent problem.
If the check engine light comes back on after a reset, the vehicle should be serviced by a qualified technician.
Access And Change Vehicle Info Settings
Access the Maestro settings to confi gure the alerts that can be generated. These alerts will
cause the Vehicle Info screen to come up when certain conditions occur.
•Set Tire Location
Toyota vehicles do not have a pre-assigned
designation for the location of each tire on
the vehicle. As an example, the tire pressure
for the front left tire may display in the right
rear position. To correct this, the Maestro
module allows you to set the tire location
in the vehicle info settings menu. Select
the “Set Tire Location” menu option, then
follow the on-screen instructions. For this
procedure, you will be required to defl ate each tire slightly.
•Check Engine Alert
Enables the Vehicle Info screen to be displayed automatically when the check engine light
turns on in the vehicle. The diagnostic codes can be read and cleared.
Warning: If the check engine light turns on after clearing the trouble code, it may indicate serious problems with the engine. Have the vehicle
serviced by a qualified technician.