Owner's Manual

maestro.idatalink.comAutomotive Data Solutions Inc. © 2016
4
JVCRRSRCHR03DSOGEN
USING MAESTRO FEATURES - VEHICLE INFO
HOW TO GET THERE:
VEHICLE INFO
Access And Display Vehicle Info Screen
In the My Vehicle submenu, press on Vehicle
Info to display information about the vehicle
such as tire pressure, battery voltage and open
entry points. If your vehicle is equipped
with a compatible tire pressure monitoring
system (TPMS), the digital tire pressures will
be displayed for each tire. Should your check
engine light come on, the CHECK ENGINE
button will become active and you will be able to press this button to see the active trouble
codes and attempt to reset them.
NOTES: The tire pressures rely on proper programming by the technician when tires are changed or rotated. If your tires have been rotated but
not reprogrammed, the tire locations on this screen may be incorrect.
The system will attempt to reset engine trouble codes when you press the Reset button However, this will not correct a persistent problem.
If the check engine light comes back on after a reset, the vehicle should be serviced by a qualified technician.
Access And Change Vehicle Info Settings
Access the Maestro settings to confi gure the alerts that can be generated. These alerts will
cause the Vehicle Info screen to come up when certain conditions occur.
•Check Engine Alert
Enables the Vehicle Info screen to be displayed automatically when the check engine light
turns on in the vehicle. The diagnostic codes can be read and cleared.
Warning: If the check engine light turns on after clearing the trouble code, it may indicate serious problems with the engine. Have the vehicle
serviced by a qualified technician.
•Door Alert
Enables the Vehicle Info screen to be displayed automatically if a door is opened or left open
when the vehicle speed exceeds 5 mph or 8 km/h.
•TPMS Alert
Enables the Vehicle Info screen to be displayed automatically when a TPMS fault is detected
(only if TPMS is available in the vehicle and supported by Maestro).
USING MAESTRO
FEATURES 
VEHICLE INFO
Maestro features can be accessed
in the My Vehicle submenu. If an
icon is not active (gray color) then
it is not available in your vehicle or
it was disabled when the Maestro
module was programmed using
Weblink. The options described
here may not be available in your
vehicle.