Owner's Manual

ADS-AR-AS-DFO2-IG-EN maestro.idatalink.com
FORD EDGE WITH DFO2 (VERSION 2.0) 20112019
Automotive Data Solutions Inc. © 2021
6
INSTALLATION INSTRUCTIONS
TROUBLESHOOTING TIPS:
• To reset the module back its factory settings, turn the key
to the OFF position then disconnect all connectors from the
module. Press and hold the module’s programming button
and connect all the connectors back to the module. Wait,
the module’s LED will fl ash RED rapidly (this may take up
to 10 seconds). Release the programming button. Wait, the
LED will turn solid GREEN for 2 seconds.
For technical assistance :
Call : 1-866-427-2999
E-mail : [e-mail]
Visit us at : maestro.idatalink.com/support and
www.12voltdata.com/forum/
1