Owner's Manual

ManualsBrandsiDatalink ManualsCar AmplifiersT-harness for adding a Rockford Fosgate DSR1 processor to select 2013-up Chrysler-built vehicles without a factory amp

Table Of Contents

Install Guide

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your DSR1 module according to the guide for your

vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

Summary of content (77 pages)

PAGE 1
SELECT VEHICLE PRINT PAGES NEEDED HOW TO USE THIS INSTALL GUIDE 1 Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. 2 Print only the pages for your vehicle using the advanced options in the Print menu. 3 Install your DSR1 module according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. NOTICE: Automotive Data Solutions Inc.
PAGE 2
INSTALL GUIDE Chrysler 300 2015-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 3
Chrysler 300 2015-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 4
Chrysler 300 2015-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 5
Chrysler 300 2015-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 6
INSTALL GUIDE Chrysler 300 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 7
Chrysler 300 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 8
Chrysler 300 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 9
Chrysler 300 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 10
INSTALL GUIDE Chrysler Pacifica 2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 11
Chrysler Pacifica 2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 12
Chrysler Pacifica 2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 13
Chrysler Pacifica 2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 14
INSTALL GUIDE Chrysler Pacifica 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 15
Chrysler Pacifica 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 16
Chrysler Pacifica 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 17
Chrysler Pacifica 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 18
INSTALL GUIDE Dodge Challenger 2015-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 19
Dodge Challenger 2015-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 20
Dodge Challenger 2015-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 21
Dodge Challenger 2015-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 22
INSTALL GUIDE Dodge Challenger 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 23
Dodge Challenger 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 24
Dodge Challenger 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 25
Dodge Challenger 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 26
INSTALL GUIDE Dodge Charger 2015-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 27
Dodge Charger 2015-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 28
Dodge Charger 2015-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 29
Dodge Charger 2015-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 30
INSTALL GUIDE Dodge Charger 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 31
Dodge Charger 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 32
Dodge Charger 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 33
Dodge Charger 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 34
INSTALL GUIDE Dodge Durango 2014-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 35
Dodge Durango 2014-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 36
Dodge Durango 2014-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 37
Dodge Durango 2014-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 38
INSTALL GUIDE Dodge Durango 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 39
Dodge Durango 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 40
Dodge Durango 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 41
Dodge Durango 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 42
INSTALL GUIDE Jeep Grand Cherokee 2014-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 43
Jeep Grand Cherokee 2014-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 44
Jeep Grand Cherokee 2014-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 45
Jeep Grand Cherokee 2014-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 46
INSTALL GUIDE Jeep Grand Cherokee 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 47
Jeep Grand Cherokee 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 48
Jeep Grand Cherokee 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 49
Jeep Grand Cherokee 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 50
INSTALL GUIDE Jeep Wrangler JL 2018-2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 51
Jeep Wrangler JL 2018-2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 52
Jeep Wrangler JL 2018-2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 53
Jeep Wrangler JL 2018-2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 54
INSTALL GUIDE Ram 1500 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 55
Ram 1500 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.support@idatalink.
PAGE 56
Ram 1500 2013-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 57
Ram 1500 2013-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 58
INSTALL GUIDE Ram 1500 2018 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 59
Ram 1500 2018 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.support@idatalink.
PAGE 60
Ram 1500 2018 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 61
Ram 1500 2018 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 62
INSTALL GUIDE Ram 1500 without ANC 2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 63
Ram 1500 without ANC 2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 64
Ram 1500 without ANC 2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 65
Ram 1500 without ANC 2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 66
INSTALL GUIDE Ram 2500 & 3500 2013-2017 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 67
Ram 2500 & 3500 2013-2017 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 68
Ram 2500 & 3500 2013-2017 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 69
Ram 2500 & 3500 2013-2017 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 STEP 4 N.C. DSR1 MODULE RED WHITE WHITE BLACK BLACK N.C.
PAGE 70
INSTALL GUIDE Ram 2500 & 3500 2018 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 71
Ram 2500 & 3500 2018 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.support@idatalink.
PAGE 72
Ram 2500 & 3500 2018 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 73
Ram 2500 & 3500 2018 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.
PAGE 74
INSTALL GUIDE Ram 2500 & 3500 without ANC 2019 ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION, WITHOUT CHANGING YOUR RADIO. PRODUCTS REQUIRED Rockford Fosgate DSR1 iDatalink Maestro DSP-CH3 Installation Harness OPTIONAL ACCESSORIES PROGRAMMED FIRMWARE ADS-DSR1-CHR02C NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PAGE 75
Ram 2500 & 3500 without ANC 2019 WELCOME Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifier replacement solution. You are now a few simple steps away from enjoying your new car amplifier. TABLE OF CONTENTS Installation Instructions 3 Wiring Diagram 4 Before starting your installation, please ensure that your module is programmed with the correct firmware for your vehicle and that you carefully review the install guide. NEED HELP? 1 866 427-2999 maestro.
PAGE 76
Ram 2500 & 3500 without ANC 2019 INSTALLATION INSTRUCTIONS CHIME ADJUSTMENT STEP 1 This is only needed when the vehicle supports chimes (ex: Parking assist, Blind spot detection, Lane sense, etc.). • Remove the factory radio and plug the DSP-CH3 T-Harness in line with the radio plug. STEP 2 • Set the audio source to OFF. If there is no way to turn the radio OFF, set the source to AUX. • Configure the 2 pin connectors on the DSP-CH3 T-harness as shown on the wiring diagram.
PAGE 77
Ram 2500 & 3500 without ANC 2019 WIRING DIAGRAM STEP 3 STEP 1 AUDISON AMPLIFIER WHITE (LEFT FRONT) WHITE/BLACK (LEFT FRONT) GRAY (RIGHT FRONT) GRAY/BLACK (RIGHT FRONT) GREEN (LEFT REAR) GREEN/BLACK (LEFT REAR) PURPLE (RIGHT REAR) PURPLE/BLACK (RIGHT REAR) CONNECT TO OEM RADIO HARNESS CONNECT TO OEM RADIO CONNECTOR DSP-CH3 T-HARNESS STEP 2 N.C. STEP 4 N.C. BLACK DSR1 MODULE RED WHITE WHITE BLACK CAN JUNCTION CONNECTOR N.C.