Owner's Manual

Patent No. US 8,856,780 CA 2759622
HCX Product Guide
MODULE DIAGNOSTICS - 2 OF 2
MODULE STATUS DURING: LED 2* LED 1** LED STATUS DIAGNOSTIC
REMOTE START SEQUENCE
•
Flashing rapid RED Remote start shutdown sequence.
•
Flashing slow RED Remote start shutdown error code. Contact technical support.
•
Solid RED Remote start crank delay.
•
Flashing rapid GREEN Remote start cycle in progress. Working correctly.
•
1 GREEN fl ash Remote start initiated successfully.
•
3 GREEN fl ashes Idle mode cycle in progress.
•
4 GREEN fl ashes Turbo mode cycle in progress.
•
Flashing GREEN Remote start cycle in progress. Displays vehicle platform during runtime.
•
Rapid GREEN fl ashing Secure takeover initiated. Waiting to complete takeover after brake press.
TRANSMITTER PROGRAMMING
•
Solid RED Remote programming in progress, waiting for remote pairing.
•
1 GREEN fl ash Remote programmed.
•
4 RED fl ashes Shutdown remote starter before attempting remote programming.
•
5 RED fl ashes Engine must be off before attempting remote programming.
•
6 RED fl ashes System must be unlocked/disarmed before attempting remote programming.
•
7 RED fl ashes Module must be learned to the vehicle before attempting remote programming.
* LED 2 (RS) displays generic diagnostic codes specifi c to the remote start module. Orange LED fl ashes may appear red.
** LED 1 (Bypass) displays diagnostic codes specifi c to the fi rmware loaded on the module.
Visit the programming diagnostics page for more information.
www.idatalink.comAutomotive Data Solutions Inc. © 2022 HCX
PAGE 6 OF 15
• 20220113