Owner's Manual

01
02
03
ENGINE
START
STOP
OFF ACC ON START
ON
04
05
06
ENGINE
ST
ART
STOP
OFF AC
C ON STARTOFF
07
08
09
ENGINE
START
STOP
OFF ACC ON STARTSTART
START
10
11
12
13
14
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Close driver door.
Re-open driver door to wake up data bus.
Set ignition to ON position.
LED 1 will turn solid RED.
Within 5 seconds, LED 1 will flash GREEN
rapidly.
Set ignition to OFF position.
Press UNLOCK on the OEM remote. If vehicle
is not equipped with OEM remote, press
module programming button.
Wait, LED 1 will turn solid GREEN for 2
seconds.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN.
Module Programming Procedure completed.
PAGE 6 OF 9
Patent No. US 8,856,780 CA 2759622 2007-2011 Dodge Nitr
o AT
www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADSRSACH5HCX000AEN
20181115
r
0 10
~
\.!) ~ ~
1111 Ill)