Owner's Manual

WEBLINK REFERENCE
Visit maestro.idatalink.com and click on FLASH YOUR
MODULE to access the WEBLINK menu.
Log in if you are already registered.
Create an account if you are not registered.
Select your vehicle’s make, year and model.
Select your vehicle’s factory radio trim. This is not to be
confused with the aftermarket radio that you are about to
install.
Select the steering wheel that matches the one in your
vehicle. Only the radio related control buttons must match.
Cruise control buttons and other kinds of buttons are not
important. If you choose a non matching steering wheel,
some GM features may not work.
Select the brand and the model of the aftermarket radio that
you are about to install. Then enter the serial number of the
aftermarket radio you are installing.
On this screen, check the boxes next to the features you wish
to retain and uncheck the ones you want to remove. If a
feature is grayed out, it cannot be retained with the current
selection. Click on the feature to see how to retain it. If a
feature is not shown, it is not available for the selected
vehicle.
Click to change the functions of your steering wheel buttons.
If a function is not shown in the drop down menu, it means
that it’s not supported by the radio.
Click on NEXT to program your module.
Click to view and print your wallet card.
Click to see your install guide.
This is a wallet card example.
1-
2-
3-
4-
5-
6-
7-
8-
9-
10-
11-
12-
13-
14-
1
2
4
5
6
12
11
13
14
7
8
3
9
10
maestro.idatalink.comAutomotive Data Solutions Inc. © 2013 ADSRRSRGMS05DSTHIGEN
PAGE 3 OF 9
• 20130729