Owner's Manual
Table Of Contents
- Install Guide – Retain SYNC using Kenwood GEN 1 Radio (2012 DNX, DDX370 and DDX271)
- Install Guide - Universal Ford Radio Replace using any Brand Radio
- Install Guide - Retains Steering Wheel Controls / Sync Voice Commands / Sync Bluetooth / Sirius Satellite
- Owners Guide - FOR1 & Kenwood Radio
- Scans of Packaging
GETTING STARTED
WELCOME
Congratulations on the purchase of your iDatalink Maestro
RR Radio replacement solution. You are now s few simple
steps away from enjoying your new car radio with enhanced
features. To complete the installation of your product, please
follow the step-by-step instructions outlined below.
1- INSTALL THE WEBLINK UPDATER PLUG-IN
• Go to "idatalinkmaestro.com/plugin" and read the
system requirements.
• Click the DOWNLOAD NOW button and run
the setup.exe fi le.
2- REGISTER A WEBLINK ACCOUNT
• Go to "idatalinkmaestro.com/register" and complete
the CONSUMER registration form.
• You will receive a confi rmation email. Click on the
included link to activate your Weblink account.
3- PROGRAM FIRMWARE TO YOUR
MAESTRO MODULE
• Connect your Mestro module to your PC using
the included
• USB programming cable included in your iDatalink
Maestro box.
• Follow the WEBLINK REFERENCE included on page 3.
4- INSTALL YOUR MAESTRO MODULE IN
YOUR VEHICLE
• Follow the INSTALLATION INSTRUCTIONS listed
on page 4.
• Refer to the WIRING DIAGRAM included on page 5.
• See the WIRE CHART on page 6.
• See the RADIO CONTROL CABLE WIRING DIAGRAM on
page 7.
maestro.idatalink.comAutomotive Data Solutions Inc. © 2013 ADS-RR(SR)-FOR01-ASTH-IG-EN
PAGE 2 OF 7
ǩ
DOC.: #12466