Quick Start Guide

ManualsBrandsiDatalink ManualsAmp Accessories & Installation PartsiDatalink - Maestro/Rockford Fosgate 8-Channel Interactive Signal Processor for Select Vehicles - Black

DSR1

PRODUCT OVERVIEW & APP SETUP

Step 2 - Non Vehicle-Specific Installation

The DSR1 comes pre-programmed as follows:

 • (4)Inputs

 • (8)ActiveOutputs:

   -Front(L/R)

   -Spare(L/R,signalderivedfromfrontinputs)

   -Rear(L/R)

   -Sub(L/R)

Subwooferisasummingofall4inputchannels.No

balance,nofade.Youwillneedtodownloadtheappif

youwanttorecongurethedeviceandtakeadvantageof

thecustomaudiotuningcapabilities.

Step 3 - Download the App

TotakeadvantageofthefullDSR1’stuningcapabilities,

downloadtheRockford Fosgate PerfectTune™app,

designedtorunonbothtabletsandmobiledevices.

Step 4 - App Setup & Tuning

Onceyouhavetheappinstalledontoyourdevice,the

setupprocesswillwalkyouthroughthenecessarysteps

forpairingthedevicetotheDSR1.Afterthepairingis

complete,theappwillcontinuetoprovideinstructionto

nalizethedesiredaudiotuneforthevehicle.

PLCOUTPUT

INPUTVEHICLE

HIGH LOW

INPUT LEVEL

EXP

STATUS

USB

Output Harness

Punch Level Control

(sold separately)

USB Setup / Update Port

Input Harness

Status Indicator

Expansion Port

Input Level Switch

Vehicle T-Harness

(sold separately)

IfyouplantouseDSR1inaMAESTROvehicle-specicinstallation,proceed

withsteps1-3below,thenfollowMaestroprogrammingabove.

PerfectTune™ App

Step 1 - Update DSR1

GetthelatestaudiofeaturesbyupdatingtheDSR1at

www.rockfordfosgate.com/products/details/dsr1.

Summary of content (4 pages)

PAGE 1
DSR1 PRODUCT OVERVIEW & APP SETUP If you plan to use DSR1 in a MAESTRO vehicle-specific installation, proceed with steps 1-3 below, then follow Maestro programming above. USB Setup / Update Port Step 1 - Update DSR1 Get the latest audio features by updating the DSR1 at www.rockfordfosgate.com/products/details/dsr1.
PAGE 2
DSR1 FLEXIBLE INPUT CONFIGURATIONS The DSR1 can be utilized out-of-the-box with high-level, low-level, or with a T-harness and vehicle specific firmware enabling integration without loss of factory equipped controls and features. FACTORY RADIO + T-HARNESS FACTORY RADIO AFTERMARKET RADIO Allows for installation of aftermarket amplifiers with vehicle specific firmware and T-harness while retaining factory radio controls and features.
PAGE 3
DSR1 TYPICAL OUTPUT CONFIGURATION + PIN OUTS The all-in-one digital sound processor and amplifier replacement interface allows for installation of aftermarket amplifiers in virtually any vehicle.
PAGE 4
DSR1 MAESTRO PROGRAMMING & INSTALLATION The DSR1 module will require web-programming as per the steps below, before installation as well as a vehicle-specific T-harness sold separately. Step 1 - Update DSR1 Prior to Maestro programming, update the DSR1 at www.rockfordfosgate.com/products/details/dsr1 for the latest audio features. Step 2 - Install the Weblink plugin (for PC only) Go to idatalinkmaestro.com/plugin and follow the installation steps. Review the System Requirements before installing.