Quick Guide

K1 Overview Remove battery Install battery Install SIM card
Install storage card
LED indicator
Earphone
Camera
Flash light
Buckle
SIM Card
(Note:above sample is standard SIM card, reboot after
changing SIM card)
(Note:above sample is Micro SD card, reboot after
installing storage card)
Scan key
Return
Customize
ENTER
Delete
Character/Digit switch
Customized keyboard
Direction
Type- C Power
Right side
scan key
Left side
scan key
Scan window
Speaker
Bottom Charge pin
1. Slide right to unlock 1. Put the battery into the battery compartment from
upper side and press downwards.
1. Push the cover to OPEN direction and flip cover.
1. Push the cover to OPEN direction and flip over
storage card.
2. Insert storage card, cover up then push it to
LOCK direction.
2. Insert SIM card, cover up then push it to LOCK
direction.
2. Insert the battery cover to the bottom then press
onwards.
3. Slide left to lock
2. Pull up the battery cover from upper side
3. Pull up the battery
Buckle
Storage card
iData K1 quick guide
Charging
You can follow below 2 ways to charge:
Charging indicator instruction:
Hints:
Bottom charging clip Charging card
ii.By bottom charging clip;
ii.By slot charging stand.
Charging: indicator turns red.
Fully charged: indicator turns green.
Insufficient battery:
①Screen shows battery less
than 20%.
②Low battery beep.
③Indicator red blinks.
Below action would prolong battery standby time:
Shorten hibernate time
(Settings->Display->Hibernate).
Turn down screen brightness
(Settings->Display->Brightness).
Shutdown functions when not use,
like GPS/Bluetooth/Wi-Fi/3G/NFC etc.