TM New MINIMAG Magnetic Stripe Reader USB/Keyboard Interface Quickstart Manual ID TECH 10721 Walker Street Cypress, California 90630 (714) 761-6368 www.idtechproducts.com 80066506-001 Rev.
DEFAULT SETTINGS TABLE AGENCY APPROVED The MiniMag reader is shipped from the factory with the following default settings already programmed: Specifications for subpart B of part 15 of FCC rule for a Class A computing device.
©2006 International Technologies & Systems Corporation. The information contained herein is provided to the user as a convenience. While every effort has been made to ensure accuracy, ID TECH is not responsible for damages that might occur because of errors or omissions, including any loss of profit or other commercial damage. The specifications described herein were current at the time of publication, but are subject to change at any time without prior notice.
MAGSWIPETM CONFIGURATION UTILITY SPECIFICATIONS The magnetically encoded data on the magnetic stripe can be decoded (read) by magnetic card readers. The stripe data has a fixed format defined by the ISO standards. The ISO fixed format is not always convenient or useful for card reading applications. The solution is for the card reader to decode the stripe data and then arrange the data into useful format and content. The reader-formatted data is transmitted from an intelligent communication interface.
DESCRIPTION OPERATION The MiniMag™ magnetic stripe reader can read 1, 2, or 3 tracks of magnetic stripe information. In addition, it has full formatted data capabilities. The MiniMag magnetic stripe reader is easy to operate. Just follow these simple steps: When connected to the host computer via the USB input port, the MiniMag can be configured for compatiblity with the host’s software. The decoded data appears to the host as if it were entered manually by an operator through the keyboard. 1.
