User Manual

ManualsBrandsID TECH ManualsElectronicsBTPay 200

USER MANUAL

BTPay 200

Bluetooth Reader

04/10/2013

Revision History

Rev Date Description of Changes By

A 8/20/2012 Initial release

Summary of content (13 pages)

PAGE 1
USER MANUAL BTPay 200 Bluetooth Reader 04/10/2013 Revision History Rev A Date 8/20/2012 Description of Changes Initial release By
PAGE 2
BTPay 200 User Manual Table of Contents Table of Contents............................................................................................................2 1 Introduction...................................................................................................................3 2 Applicable Documents...............................................................................................3 3 Features and Benefits.......................................................................
PAGE 3
BTPay 200 User Manual 1 Introduction The BTPay 200 is a Payment Card Industry (PCI) certified Personal Identification Number (PIN) Entry Device that encrypts a PIN for secure transmission that works with mobile devices or PCs with Bluetooth connectivity. It includes a PIN Pad, a secure MagStripe reader and a Smart Card reader.
PAGE 4
BTPay 200 User Manual 5 Specifications • • • • • • • • • Interface - Bluetooth v2.
PAGE 5
BTPay 200 User Manual - 4kV contact, and 8kV air discharge • Environmental Temperature range - Operating 0 to 55° C (32 to 131° F) [non-condensing] - Storage -30 to 70° C (-22 to 158° F) [non-condensing] Relative humidity: maximum 95% (non-condensing) 6 Operation How to make Bluetooth link between the BTPay 200 and PC please follow these steps: 1. Install the battery to power on the BTPay 200, please ensure that the battery is fully charged before installing.
PAGE 6
BTPay 200 User Manual 2. Insert the Bluetooth adapter into the USB port on the PC. The Bluetooth adapter work properly the computer will display the Bluetooth icon Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
PAGE 9
BTPay 200 User Manual 4. After the device was successfully added to the computer, select “Show Bluetooth Devices” and found the correct communication serial port. Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
PAGE 13
BTPay 200 User Manual FCC INFORMATION - This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.