Spec Sheet
Electrical
Magnetic TTL: Power +5 VDC +/-10% (50mV ripple maximum).
Ground 0 VDC (GND). Chassis ground connected to GND
and magnetic head case.
Operating Current: 1mA per track maximum when reading a card,
Keyboard. About 40mA for decoded magnetic stripe,
USB/Keyboard and RS-232. About 70mA for decoded mag
netic stripe, USB-HID and USB-CDC. 5.5mA typical with LED
(<8mA at peak usage) for port-powered model.
External Power Supply: 5 VDC/350mA (required for RS-232 version only). Port-
powered option requires no power supply.
Environmental
Operating Temperature: 32°F to 131°F (0°C to 55°C ).
Storage Temperature: -22°F to 158°F (-30°C to 70°C ).
Humidity: Maximum 95% non-condensing.
Reliability
Magnetic Head Life: 1,000,000 passes minimum.
Rail and Cover Life: 1,000,000 passes minimum.
Conformance: ISO 7811 1-6.
Warranty: Two years, parts and labor.
Mechanical
Magnetic Stripe Formats: ISO 7811, AAMVA, and CA DMV.
Swipe Speed: 3 to 60 inches per second, bi-directional. (5 to 50 inches
per second for port-powered model.)
Card Thickness: .015 to .045 inches.
Slot Width: .050 inches (1.37mm).
Indicators: Tri-colored LED, beeper (not available on port-powered
model).
Interfaces: RS-232, Keyboard (PS/2), USB/KB, USB/HID, USB/CDC
RS-232 Port-Powered
Dimensions: Length: 3.54 inches (90mm). Width: 1.34 inches (34mm).
Height: 1.10 inches (28mm).
Weight: Approximately 4.6 oz.
Cable Length: 6-foot side exit cable. (Bottom exit is an option; minimum
quantities apply.)
Connectors: Keyboard: 6 pin mini-DIN. RS-232: DB9F.
Foot Print:
©2007 International Technologies & Systems Corporation. ID TECH is a registered trademark of International Technologies & Systems Corporation.
MiniMag and Value through Innovation are trademarks of International Technologies & Systems Corporation. All specifications subject to change without notice.
80066504-001
R12/07
IDMB-33XXXX MiniMag Specifications
Corporate Headquarters:
10721 Walker Street Cypress, California 90630
(714) 761-6368 Fax: (714) 761-8880
sales@idtechproducts.com
International Sales Office
for Canada & South America:
+450 465 5261 (Canada) robertop@idtechproducts.com
European Sales Office:
+33 5 65 50 28 59 (France) iann@idtechproducts.com
ISO 9001 : 2000 Certified