User's Manual

ManualsBrandsID TECH ManualsElectronicsAC100

80144501-001

AC100

User Manual

Rev. A

06/03/2016

Summary of content (18 pages)

PAGE 1
80144501-001 AC100 User Manual Rev.
PAGE 2
Copyright 2016, International Technologies and Systems Corporation. All rights reserved. ID TECH 10721 Walker Street Cypress, CA 90630 USA This document, as well as the hardware and software it describes, is furnished under license and may only be used in accordance with the terms of such license. The content of this paper is furnished for informational use, subject to change without notice, and not to be construed as a commitment by ID TECH.
PAGE 3
FCC Regulatory Compliance Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 4
Table of Content 1. Introduction ..................................................................................................................... 5 2. Product Configurations.................................................................................................... 5 3. Features............................................................................................................................ 5 4. MECHANICAL DESIGN SPECIFICATION ..........................................................
PAGE 5
1. Introduction This document outlines the mechanical, electrical, and connectivity features of the ID TECH AC100 controller, a Linux-based application deployment platform and connectivity solution for users of ID TECH payment peripherals. The AC100 is designed to allow deployment of a wide range of secure payment apps while easing EMV L3 certification requirements. 2. Product Configurations IDCL-51 AC100; Desktop 3. Features  Linux Operating System (3.14.
PAGE 6
 Top view: Logo (IDTECH) Surface: High Polish LED-pipe Color: Transparent Surface: Polish Page 6 of 18 Top Housing Color: White Surface: MT11006
PAGE 7
RS232 Ethernet USB port (1 of 3) MicroUSB port SD storage access Power connection 4.2 Body Description    Reset button Housing - Material: Polycarbonate/ABS resin. - Wall thickness: 2.5mm. Label - Material: Lbl;Z-Ultimate;3000 White; 38mmx21mm;5570-R. - Contents:  Model Number: IDCL-51  Serial Number: To comply WI 7.5.1-8.  Assembled in XXX (country of origin)  Revision  Bar Code: Code 128  MAC (12 hex digit)  FCC ID  CE mark Circuit board - Material: FR-4 - Dimension: 128.00mm(L)*61.
PAGE 8
 USB-A (3 ports) - Connector type: USA2-04F1-XNRX-11 - Dimensions: 14.30mm(L)*6.90mm(W)*14.00mm(T)  Micro USB - Connector type: 5P F SMT Shell DIP 2.0MM;RoHS (CON188R) - Dimensions: 8.0mm(L)*5.55mm(W)*3.0mm(T)  RJ45 (Ethernet) - Connector type: KRJ-14006-108XX-GY-A - Dimensions: 15.9mm(L)*13.6mm(W)*21.3mm(T)  SD Card - Connector type: 96-90025-085 T-FLASH CARD1 - Dimensions: 14.75mm(L)*14.5mm(W)*2.
PAGE 9
   - Three Single-Color LEDs (green, yellow, red) under firmware control. Supports Wi-Fi Supports micro SD Card Interfaces - The controller has one RS232 and 4 USB ports  One USB port to be a USB Micro B connector (Device)  Three USB A connectors （Host）  RS232 DB9 Female  Ethernet RJ45  Ports are spaced adequately to prevent interference when multiple devices are connected.  Bluetooth is supported.
PAGE 10
4.5 Environmental  Electro-Static Discharges (ESD) - The electronics are designed to survive ESD of 8kV contact, and 8 kV air discharge, without permanent damage  Environmental Temperature range: o Operating 0 C to 40 C o Storage -40º C to 80º C o Relative humidity: 10% to 95% non-condensing 4.6 Agency Approvals - FCC ID - CE - ROHS 2 and REACH 5. FIRMWARE DESIGN SPECIFICATION The device uses a generic Linux system, version 3.14.38.
PAGE 11
    CSF key: This key is a subordinate key of the SRK key, and is used to verify the CSF data. CSF (Command Sequence File) is a binary data structure interpreted by the HAB to guide authentication operations. IMG key: This key is a subordinate key of the SRK key, and is used to verify the u-boot image. OSK key: This key is a subordinate key of the SRK key, and used to verify the OS image and the monitor daemon. APK key: This key is a subordinate key of the SRK key, and used to verify applications. 5.
PAGE 12
Get version of this application Command: 02 09 00 00 00 01 34 bf 03 Response: Error status [NULL-terminated version string] Add/Update application Command: 02 length 02 sequence (little endian, 4 bytes) path mode data CRC 03 : The length must be less than 1200 bytes. : The range is 0x000000 -0x00100000. The first package’s sequence must be 0x00000000, the next package’s sequence is the current package’s sequence plus 1. The last package’s sequence must be large than 0x00100000.
PAGE 13
Add directory Command: 02 length 07 path mode CRC 03 : The length must be less than 200 bytes. : A NULL-terminated string which defines the absolutely path of the directory. The length of the path must be less than 200 bytes. : Defines the mode of the directory. Bit0: 1 means can be executed, 0 means not. Bit1: 1 means can be written, 0 means not. Bit2: 1 means can be read, 0 means not.
PAGE 14
Get Version Get the test application’s version. Command: 01 Response: NULL-terminated string. Set Serial Number Set device's serial number. Command: 02 : NULL-terminated S/N Response: 06 if succeeded, or E1 if failed. Get Serial Number Get device's serial number. Command: 03 Response: Device's serial number if succeeded, or E1 if failed. LED test Control the ON or OFF of three LEDs. Command: 92 : Specify which LED to control. Bit 0: RED.
PAGE 15
Command: 95 Response: The file’s content if succeeded, or E1 if failed. Note: This command will take about 2 seconds. Wi-Fi test Test if the gateway is accessibility through Wi-Fi. Command: 96 : 4 bytes IP4 address. : NULL-terminated AP’s name. : NULL-terminated AP’s password. Response: 06 if succeeded, or E1 if failed. Note: This command will take about 20 seconds. Blue-Tooth test Test if the blue-tooth is accessible.
PAGE 16
Command: 9B : the length is 17 bytes. The format is xx:xx:xx:xx:xx:xx. eg. 31 31 3A 32 32 3A 33 33 3A 34 34 3A 35 35 3A 36 36 means 11:22:33:44:55:66. Response: 06 if the MAC address is valid, or E1 otherwise Get MAC This command will get the ethernet’s MAC address. Command: 9C Response: 06 if the MAC address is exist, or E1 otherwise.
PAGE 17
Revision History Revision Description and Reason for Change Date 50 First draft. 01/05/16 A Edits for style and content. Formatting. Deletion of inapplicable content.
PAGE 18
Caution CE1177 1. Adapter shall be installed near the equipment and shall be easily accessible. 2. Avoid exposing your mobile phone to extreme hot or cold temperatures. The temperature range for using the phone is 0°C~40°C. 3. This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.