User manual

43 of 66

ID TECH EzWriter

Command: Shift to AMC protocol

Command code: <ESC> AMC

Hex code: 1B 41 4D 43

Response: <ESC> 0 :

Description: This command is used to shift the protocol to AMC and perform a reset in

AMC protocol.

Data Formats

[Data Block] format

[Card Data] format

Char Data

Char Code <ESC>1 [string1] <ESC>2 [string2] <ESC>3 [string3]

Hex Code 1B 01 [string1] 1B 02 [string2] 1B 03 [string3]

[Status Byte] format

[Raw Data Block] format

Start Field EzWriter Data

Field

Ending Field

Command

Code

Hex code 1B 73 [Raw Data] 3F 1C

[Raw Data] format

Raw Data

Char Code <ESC>1[L1][string1] <ESC>2[L2][string2]

<ESC>3[L3][string3]

Hex Code 1B 01[L1][string1] 1B 02[L2][string2] 1B 03[L3][string3]

Note: [L1],[L2],[L3] is the length of [string1],[string2],[string3]

None available or none data on tracks does not output when swipe of card

Start Field EzWriter Data

Field

Ending Field

Commend

Code

Hex code 1B 73 [Card data] 3F 1C

Status Description Hex ASCII

Ok Read, Write, or Command ok 30 0

Read /

Write

Error

Track 1 error 31 1

Track 2 error 32 2

Track 1 and Track 2 error 33 3

Track 3 error 34 4

Track 1 and Track 3 error 35 5

Track 2 and Track 3 error 36 6

Track 1, Track 2 and Track 3 error 37 7