User manual

14 of 66

ID TECH EzWriter

The WorkShop default setting is for Lo-Co magnetic stripe cards. For Hi-Co magnetic

stripe cards, click the “Setup” button in the lower right corner of the WorkShop window.

Then click the High Coercivity check box. See the example with the Hi-Co box checked.

Do not change any other selection. Click OK to return to the WorkShop window.

There are two sample cards provided with the EzWriter. One is a Lo-Co type and the other

is a Hi-Co type. Either one or the other can be used. The coercivity in the Setup window

must be set to match the card type used. Note: the EconoWriter product supports only low

coercivity card writing; selecting the High Coercivity check box does not affect EconoWriter.