FlexCage MB975SP-B 5 HDD Slots in 3 Device Bay Tray-Less SATA Backplane Module User Manual
English Package Contents Device x 1 Front Panel Information HDD3 HDD2 POWER BUTTON POWER / ACCESS LED INDICATOR POWER BUTTON POWER / ACCESS LED INDICATOR HDD4 HDD1 POWER BUTTON POWER / ACCESS LED INDICATOR POWER BUTTON POWER / ACCESS LED INDICATOR HDD5 POWER BUTTON POWER / ACCESS LED INDICATOR User Manual x 1 (Please install the device in this position) M3*6mm Screws x 8 z The LED indicator illuminates in blue after the hard drive is inserted into the drive bay, it will remain off if t
English HDD 1 HDD 2 HDD 3 HDD 4 HDD 5 Rear Panel Information z z All Three 15-PIN SATA power connections must be used for proper operation of the enclosure. Fan Speed Control 80 x 80 x 25mm Fan The fan speed control can be switched for High, Low and Auto settings. In High, the fan is at the maximum output, Low mode is 60% of the maximum, and in Auto mode, the fan speed will adjust according according to the temperature of the drives.
English ˏ˕ˑ ( Insert the drive with the SATA connectors facing the right side of the device.
English Fan Replacement Information z 2 PIN 3 PIN To replace the fan, please make sure the fan connector is compatible with the 2-PIN or 3-PIN connections on the device. Fan cable routing Note: 1. ICY DOCK reserves the right to change unrelated technical specifications and is subject to change without prior notice. 2. ICY DOCK will not be liable for any software, hardware, or data stored within or interfacing with ICY DOCK products which results in damage or malfunction.
Español Contenido del paquete Información relacionada con el panel frontal HDD3 HDD2 BOTÓN DE ALIMENTACIÓN INDICADOR LED DE ALIMENTACIÓN / ACCESO Dispositivo x 1 BOTÓN DE ALIMENTACIÓN INDICADOR LED DE ALIMENTACIÓN / ACCESO HDD4 HDD1 BOTÓN DE ALIMENTACIÓN INDICADOR LED DE ALIMENTACIÓN / ACCESO BOTÓN DE ALIMENTACIÓN INDICADOR LED DE ALIMENTACIÓN / ACCESO HDD5 BOTÓN DE ALIMENTACIÓN INDICADOR LED DE ALIMENTACIÓN / ACCESO Manual del usuario x 1 (Instale el dispositivo en esta posición) Tornillos
Español HDD 1 HDD 2 HDD 3 HDD 4 HDD 5 Información del panel posterior z z Las tres conexiones de alimentación SATA de 15 contactos se deben utilizar para el funcionamiento adecuado de la carcasa. Control de velocidad del ventilador El control de velocidad del ventilador tiene tres valores posibles: Alta, Baja y Automática.
Español ˏ˕ˑ ˏ˖ˑ (Inserte la unidad con los conectores SATA orientados hacia el lado derecho del dispositivo.
Español Información de sustitución del ventilador z 2 CONTACTOS 3 CONTACTOS Para reemplazar el ventilador, asegúrese de que el conector del mismo es compatible con las conexiones de 2 o 3 contactos del dispositivo. Colocación de los cables del ventilador Nota: 1. ICY DOCK se reserva el derecho de cambiar las especificaciones técnicas no relacionadas y está sujeto a cambio sin previo aviso. 2.
6501531 VER 2.