Manual
IB-273 SeriesIB-273 Series IB-273 Series IB-273 Series IB-273 SeriesIB-273 Series
1. Modello – HDD – Extern collegamento – Colour
2. Contenuto della confezione
Cassetto, borsa, cavo USB 3.0, cacciavite, manuale
3. Caratteristiche
• Alloggiamento in alluminio e palstico
• USB 3.0 Host no a 5 Gbit/s
• Compatibile all'indietro con USB 2.0 e 1.1
• Plug & Playe Hot Swap
• HDD altezza 9,5 mm, capacità illimitata
• Supporta: Windows, Mac, Linux
4. HDD installazione
Staccare tutti i cavi di connessione con il computer durante il montaggio e lo smon-
taggio del disco sso.
5. Applicazione
5.1 Il contenitore esterno può essere collegato direttamente al computer tramite il
cavo USB. Il disco sso può essere collegato o staccato dal computer
durante il funzionamento di quest'ultimo.
5.2 Attendere la ne di funzioni di lettura e di scrittura prima di staccare un
contenitore esterno collegato al computer, per evitare perdite di dati.
5.3 Ogni nuovo disco sso deve venir inizializzato, partizionato e formattato dal
drive, prima di poter essere indicato dal sistema.
5.4 Se il disco sso non viene riconosciuto subito dal sistema, vericare:
- se il software di drive relativo è installato (USB),
- se il disco sso è stato inizializzato, partizionato e formattato.
1. Model – HDD – Interface – Colour
2. Package contents
Case, pouch, USB 3.0 cable, screwdriver, manual
3. Key Features
• Aluminium / plastic enclosure
• Blue lighting LED circle
• External data interface: 1x USB 3.0
• Downwardly compatible with USB 2.0 and 1.1
• Transfer rate: USB 3.0 up to 5 Gbit/s
• Supported operating systems: Windows, Mac and Linux
• HDD height up to 9.5 mm, capacity not limited
• Plug & Play and Hot Swap
4. HDD Installation
During the HDD assembly all cabling has to be disconnected from the computer.
5. Application
5.1 The external HDD can be connected to or disconnected from the computer
via USB cable without shutting down the computer.
5.2 Please await the end of read/write operations before disconnecting
the HDD to avoid data lost.
5.3 A new HDD must rst be initialised, partitioned and formatted
by the operation system to be displayed by the system.
5.4 If the hard disc isn't recognised instantly by the operating system
please check:
- if the driver software is installed (USB),
- if the HDD is initialised, partitioned and formatted.
1. Modell – Festplatte (HDD) – Schnittstelle – Farbe
2. Verpackungsinhalt
Gehäuse, Transporttasche, USB 3.0, Schraubendreher, Handbuch
3. Merkmale
• Aluminium / Kunststoffgehäuse
• Dekorativer LED blau beleuchteter Ring
• Externe Datenschnittstelle: 1x USB 3.0
• Abwärtskompatibel mit USB 2.0 und 1.1
• Übertragungsrate: USB 3.0 bis zu 5 Gbit/s
• Unterstützte Betriebssysteme: Windows, Mac und Linux
• Plug & Play und Hot Swap
• Festplattenbauhöhe bis 9,5mm, Kapazität ohne Limit
4. Festplattenmontage
Beim Ein- und Ausbau der Festplatte müssen alle Kabelverbindungen zum
Computer gelöst werden.
5. Anwendung
5.1 Die externe Festplatte kann im laufenden Betrieb des Rechners an diesen
via USB Kabel angeschlossen oder von diesem getrennt werden.
5.2 Bitte das Ende von Schreib- und Lesevorgängen abwarten bevor ein
angeschlossenes Gehäuse vom Rechner getrennt wird, um Datenverlust zu
vermeiden.
5.3 Eine neue Festplatte muss vom Betriebssystem erst initialisiert, partitioniert
und formatiert werden, um vom System angezeigt zu werden.
5.4 Wenn die Festplatte nicht sofort vom System erkannt wird bitte
prüfen:
- ob die Treibersoftware installiert ist (USB),
- ob die Festplatte initialisiert, partitioniert und formatiert ist.
1. Modèle – Disque dure – Interface – Couleur
2. Contenui de la livraison
Boîtier, sacoche pour transporter, câble USB 3.0, tournevis, manuel
3. Spécialitésprincipales
• Logement de matière metal / plastique
• USB 3.0 Host jusqu’à 5 Gbit/s
• Rétrocompatible avec USB 2.0 et 1.1
• Plug & Play et Hot Swap
• HDD 9,5 mm de hauteur, capacité illimitée
• Supporte: Windows, Mac, Linux
4. Installation HDD
Devant l'installation ou la désinstallation d'un disque dur il faut débrancher tous
câbles de connexion à l'ordinateur.
5. Application
5.1 Le boîtier externe peut être connecté directement à l'ordinateur en utilisant le
câble USB. Le disque dur peut être branché ou débranché de
l'ordinateur pendant l'exploitation normale de l'ordinateur.
5.2 Attendez le complètement des écritures et des lectures avant de déconnecter
un boîtier branché à l'ordinateur pour éviter une perte de données.
5.3 Avant tout, un disque dur nouvel doit être initialisé, partitionné, et formaté par
le système d'exploitation pour être indiqué par le système.
5.3 Si le disque dur n'est pas reconnu immédiatement par le système, vériez le
suivant:
- si le logiciel de pilotes est installé (USB),
- si le disque dur est initialisé, partitionné, et formaté.
1. Módulo – Disco duro – Interfaz – Color
2. Contenido del embalaje
Caja externa, bolsa del transporte, cable USB 3.0, destornillador, manual
3. Característica
• Caja externa de aluminio y plastic
• USB 3.0 Host hasta 5 Gbit/s
• Compatible hacia atrás con USB 2.0 y 1.1
• Plug & Play y Hot Swap
• HDD 9,5 mm de altura, capacidad ilimitada
• Soporta: Windows, Mac, Linux
4. Ensamblaje de disco duro
Antes de instalar o desinstalar un disco duro se debe desdesconectar los cables de
conexión / alimentación al ordenador.
5. Aplicación
5.1 Se puede conectar la carcasa directamente por el cable USB. Se
puede conectar o desconectar el disco duro del ordenador durante la operación
normal
5.2 Espere el n de escrituras y lecturas antes de desenchufar una caja conectada
del ordenador para evitar pérdidas de datos.
5.3 En primer lugar, un nuevo dicso duro debe estár inicializado, compartimentado
y formateado por el sistema operativo para estar indicado por el sistema.
5.4 Repita la coneción y compruebe en caso de que el disco duro no
sea reconocido de inmediato por el sistema e examine lo siguiente:
- si el programa de control está instalado (USB),
- si el disco duro está inicializado, compartimentado y formateado.
Model HDD Interface Colour
IB-273StU3 SATA USB 3.0 Black/Silver
Modell HDD Schnittstelle Farbe
IB-273StU3 SATA USB 3.0 Schwarz/Silber
Modèle Disque dure Interface Couleur
IB-273StU3 SATA USB 3.0 Noir/argent
Módulo Disco duro Interfaz Color
IB-273StU3 SATA USB 3.0 Negro/plata
Modello HDD Extern collegamento Colour
IB-273StU3 SATA USB 3.0 Nero/argento
Modelo HDD Host Cor
IB-273StU3 SATA USB 3.0 Preto/prata
1. Modelo–Discorígido(HDD)–Ligação–Cor
2. Conteúdo da embalagem
Caixa, bolsa, cabo USB 3.0, chave de fenda, instruções
3. Características
• Caixa em alumínio e plástico
• USB 3.0 com até 5 Gbit/s
• Para trás compatível com USB 2.0 e 1.1
• Plug & Play e Hot Swap
• HDD altura 9,5 mm, capacidade ilimitada
• Compatível com: Windows, Mac, Linux
4. Montagemdodiscorígido
Atenção: Ao instalar e remover o disco rígido, assegurar que todas as ligações dos
cabos ao computador estão desapertadas.
5. Emprego
5.1 O disco rígido pode ser ligado (ao) ou desligado do computador mesmo
quando este estiver em funcionamento
5.2 Queira fazer o favor de aguardar que terminem os processos de leitura e de
escrita antes de desligar a caixa do computador para evitar perder os dados.
5.3 Um disco rígido novo apenas pode ser inicializado, compartimentado e forma-
tado a partir do sistema operativo para ser mostrado pelo sistema.
5.4 Se o disco rígido não for imediatamente reconhecido pelo sistema, verique
o seguinte:
- Se o software do driver está instalado.
- Se o disco rígido foi inicializado, compartimentado e formatado.
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4