Manual

Quick installation guide IB-1817MC-C31
7. Install the PCB back into the track
inside the housing.
Pay attention to the correct alignment!
8. Reattach the front cover with the two
screws A. When mounting the cover,
make sure that the write protection
switch is placed in the rectangular
recess.
6. Put the heat sink plate on the thermal
pad and align the notch to the fixture.
5. Place the delivered thermal pad
directly on the M.2NVMe SSD.
Note! Change the write-protect setting
before connecting the device to the
computer. *
5
6
7
8