P O HUP ICS-60 CXP.
M4 C X P 1 Elevation dial(up,down) Component names Front sight Windage dial (Left,Right) Hand guard Birdcage flashhider Ejection cover assembly Forward assist assembly Retractable stock Magazine catch button Charging handle Sling clip Outer barrel Pistol grip Front sling swivel Bolt catch Magazine Trigger guard Model Weight ICS-60 2750g CXP Length Extend 595mm 695mm Bullet Velocity Caliber 450 90-100 / 450 Round 90-100 M/S 6 mm BB
M4 C X P 2 2-1 Compact Battery & Laser Module Battery 2 3 4 Combine both side cover and on right position Insert wire into battery end tunnel 2-2 Battery box fitting method 5 Mount laser set to right position and turn right to lock up ( ) Battery (not include) 2-3 Battery fitting method(Handguard) ( ) 6 Mount on battery box Connect battery to the receiver 2 Release 2 pins can Remove the lower handguard Insert the battery under the barrel and connect the battery.
M4 C X P 3 Ironsight adjustment 3-1 Selector lever setting Open sight adjustment Rear sight precision targeting adjustment SEMI SAFE 3-2 AUTO Rear sight up-down adjustment Backward Forward Up Forward Down Backward SEMI SAFE AUTO Safety setting SEMI SAFE Common/close-range/ low-light shooting. Push forward to engage battle sight. Precision daylight shooting. Push backward to engage peep hole.
M4 C X P 4 Movable parts 4-1 Variable retractable stock length Push the stock release lever to unlock. Adjust the 6 postition retractable stock to the most comfortable position. 4-2 4-3 Remove the lower handguard Fine adjustment of gear engagement Release 2 pins can remove hand guard Using a screw driver to fine tune the engagement between motor and gear. 4-4 4-5 4-6 Movable parts Charging handle Forward assist knob The correct position of No.
M4 C X P 5 6 HOP-UP Magazine 5-1 5-2 load BBs Magazine loading and unloading Hop-up adjustment 6-1 Decrease/low Hop Open the cover to load BBs. Please use ICS 6mm caliber BBs for optimum Performance. To charge BB feed spring, please wind magazine. Best trajectory Press the magazine release lever to load or unload the magazine. Port cover Increase Hop Pull backward the charging handle opens the bolt covers for adjustment of Hop-up unit.
M4 C X P 7 Disassemble Gear-box Reassembly is the reverse of disassemblys procedures. 7-1 Remove the upper Gearbox 2 Take the piston out. To open upper receiver, use a screwdriver to push out frame lock pins. 7-2 Remove the lower Gearbox 6 4 Take out the screw of wire from concavity. 3 2 Take out the screws on the plate. Box Remove the gearbox Take the motor out. Take out inner screw in the pistol grip. 5 Take out magazine release lever.
M4 C X P 8 8-1 Description MA-23 MA-22 MA-28 MA-21 MA-61 MA-22 MA-25 MA-27 MA-24 MC-61 MA-36 MA-93 MA-37
MA-95 MA-98 MA-97 MA-96 MA-99 MA-102 MA-31 MA-101 MA-100 MA-94 MA-38 MA-41 MC-16 MA-41 MA-30 MA-42 MA-09 MA-60 M4 C X P
