User Manual

SERIES
SERIES
Fine adjustment of gear engagement.
Cut the cotton cloth length :
approx 25~30mm / Width approx:10mm
and wind the cut cotton cloth
Arrange the wires as pictured
above.
Insert gearbox to the receiver.
note the position
note the gear wheel position while assembling
Box
25~30mm
10mm
Use the cleaning rod to move forwards
and backwards along the barrel to clean
and remove any dirt build-up inside.
Assemble Y slice and selector slice as
illustrated.
Y
BOX
Manage wire on well position.
How to use a cleaning rod
How to fabricate the receiver and box
1
1 1
2
2 2
3 4
7.
Release grip screw.
Use a hexagonal allen wrench
to fine tune the engagement
between the motor and bevel
gear. Don't adjust by yourself.
ICS-34 AKS74U / ICS-35 AK74M