Manual

Connecting a Galaxy

The Bluetooth handset will connect to the last paired

Galaxy automatically when the handset is switched off

then on, and within 10 meters range. Ensure the Bluetooth

feature is enabled on the Galaxy.

If you switch off the Bluetooth feature on the Galaxy and

then switch it on, you should connect it again.

Press beneath in the standby mode. After that,

appears below on the

Galaxy screen.

Click below on the Galaxy screen. After the

connection is successful,

appears.

Cnect

Connected to phone audio G-501

Paired G-501

Connected to phone audio

Method 1: Using the Bluetooth handset

Method 2: Using the Galaxy

Call Logs

Received or Missed Calls

Press beneath .

Press to move to , then press beneath

Press beneath to access or

press to choose , then press beneath

. The list of incoming calls appears.

Scroll through the relevant calls list using or

until you find the desired number, press to dial it

out.

2Caller

Select

Select 1Received

2Missed

Select

The last 10 received (or missed) calls are stored in the call

logs.

Note:

MissCall xx appears when you miss one or more calls.

Notes:

Make sure the handset and the Galaxy are no more

than a meter apart, so they are within operable range.

If the handset is not successfully paired within 90

seconds, it will automatically leave pairing mode. If you

still want to pair, please repeat the steps of pairing

again.