Installation Manual
Table Of Contents
- 1 Installation Preparation
- 2 Install IR Intelligent Speed Dome
- 3 Wall-mounted Bracket Installation
- 4 APPENDIX Ⅰ LIGHTNING PROOF AND SURGE PROTECTION
- 5 APPENDIX Ⅱ ABOUT RS485 BUS
- 6 APPENDIX Ⅲ THE RELATIONSHIP BETWEEN AC 24V CABLE DIAMETER AND TRANSMISSION DISTANCE
- 7 APPENDIX Ⅳ WIRE GAUGE REFERENCE SHEET
2
2
Install IR Intelligent Speed Dome
2.1
Check Accessories
Before installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are includes.
2.2
Open Device
Take out the speed dome and refer to Figure 2-1 for its appearance.
Figure 2-1
Note
It is forbidden to make the front part of speed dome face ground when placing the device, which
is to avoid damaging the front glass, lens and other optical components. The wrong way of
placing the device is shown in Figure 2-2.