User Manual

3
2 Quick Configuration Tool
2.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it
to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
2.2 Operation
Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1.
In the device list interface, you can view device IP address, port number, subnet mask, default gateway,
MAC address and etc.
Figure 2-1
Select one IP address and then right click mouse, you can see an interface is shown as in Figure 2-2.
Note:
You can set the IP address, subnet mask and gateway for the network camera and PC. Please note network
camera IP address and PC IP address shall be in the same network segment if there is no router. Network
camera default IP address is 192.168.1.108. If there is a router, please set the corresponding gateway and
subnet mask.
The factory default user name is admin and password is admin. For security reasons, please modify your
password after you first login.
For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.