User Manual
24 
PRIVACY MASK     : 
PTZ SPEED    :2 
SET ZERO 
POWER UP 
MENU PASSWORD 
MENU IDLE  : 1MIN 
PTZ AUTO STOP  : 15S 
 SELF DIAGNOSIS CORRECTION: OFF 
BACK    EXIT 
  WEEK: Here you can set the week information. Please use the left/right button to set. You can set 
for one day, or you can set for the whole week. 
  START TIME: Here you can set the task begin time. Move the cursor to current item and then click 
confirm button to set the time. Please use the up/down button to set the detailed value and then use 
left/right button to go to the next setup item. After you completed the setup, please click confirm 
button to exit start time setup and then move the cursor to the SAVE button to save current setup. 
  END TIME: Here you can set the task end time. Move the cursor to current item and then click 
confirm button to set the time. Please use the up/down button to set the detail value and then use 
left/right button to go to the next setup item. After you completed the setup, please click confirm 
button to exit end time setup and then move the cursor to the SAVE button to save current setup. 
  ACTION TYPE: The option here includes: tour/scan/preset/pattern and etc. Please use left/right 
button to set. 
  ACTION NO: It is the corresponding serial number of the schedule task.  The number here may vary 
due to different action types.  
  SAVE: After the above setting are done, move the cursor to “SAVE” and click “OK” button to save all 
the setting information. 
  BACK: Go back to the previous menu. 
  EXIT: Log out the system menu. 
Task Information 
Move the cursor to the TASK INFORMATION and then click the confirm button to go to the following 
interface. Here you can see the corresponding task information. Click the confirm button again, you can 
exit current interface. 
4.4.4.8 Next Page 
Move the cursor to the NEXT PAGE and then click the confirm button, you can go to the third menu to 
set the PTZ SPEED, SET ZERO, POWER UP and etc.  
NO  TIME  ACTION 
1 ALL  00:00-00:00  SC001 OFF 
2 ALL 00:00-00:00  SC001 OFF 
3 ALL  00:00-00:00  SC001 OFF 
4 ALL  00:00-00:00  SC001 OFF 
5 ALL  00:00-00:00  SC001 OFF 
6 ALL  00:00-00:00  SC001 OFF 
7 ALL  00:00-00:00  SC001 OFF 
8    全星期 00:00-00:00   线扫 1     关










