User Manual

23
IDLE ACTION ：OFF
IDLE TIME ：10MIN
ACTION TYPE : NONE
SN ：NONE
BACK EXIT
TASK NO ：1
TIME TASK ：OFF
TASK SETTING
TASK INFORMATION
DELETE TASK
BACK EXIT
WEEK ：ALL WEEK
START TIME ：00H 00M
END TIME : 00H 00M
ACTION TYPE : SCAN
ACTION SN : 1
SAVE
BACK EXIT
Move the cursor to “IDLE ACTION” and click ‘OK” button to set the idle action of the speed dome.
 IDLE ACTION: The speed dome will execute the preset action if it didn’t receive any valid command
during set time.
 IDLE TIME: It is to set idle time, click “left”, “right” button to set.
 ACTION TYPE: It includes “none/preset/ scan/tour/pattern” idle actions, click “left”, “right” buttons to
set.
 SN: It is to set idle motion SN. System can implement the corresponding action when it is idle for the
specified period. Click the left/right button to set.
 BACK: Go back to previous menu.
4.4.4.7 Auto Run (Schedule task)
 TASK NO: Here you can set task number. Please use the left’/right button to set.
 TIME TASK: The schedule task allows the speed dome to implement corresponding setup during the
specified time. There are two options: on/off. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
 TASK SETTING: Here you can set task time, operation, operation SN and etc. Please click the
confirm button to go to the fourth menu to set.
 TASK INFORMATION: Here you can view the corresponding task information. Please click the
confirm button to go to the fourth menu to set.
 DELETE TASK: Please input the task number to be deleted in the TASK NO, and then move the
cursor to the current item. Click the confirm button, you can remove all the setups in the current
schedule task. Now current task is null.
 BACK: Go back to the previous menu.
 EXIT: Log out the system menu.
Task Setting
Move the cursor to the TASK SETTING and then click the confirm button, you can set the task begin
time, end time, action type and etc.