User Manual

21
Move the cursor to SCAN button and then click confirm button.
 AUTO SCAN NO：Here is to set auto scan number. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
 SET LEFT LIMIT：Here is to set camera left address. Click confirm button to save current setup.
 SET RIGHT LIMIT：Here is to set camera right address. Click confirm button to save current setup.
 SCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu to
set.
 CALL: Please input auto scan number first, and then please move the cursor to CALL and click confirm
button to activate auto scan function.
 STOP: Here is to terminate auto scan function.
 BACK: Go back to previous menu.
 EXIT: Log out system menu.
4.4.4.4 Tour
Move the cursor to highlight TOUR item and then click confirm button to go to set interface.
 TOUR NO ：Here is to ser tour number. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
 TOUR SETTING: Move the cursor to tour setting item and then click confirm button. You can see the
following interface. Here you can add or remove the preset, and set the corresponding dwell time and
call speed.
 DWELL: Here is t set dwell time. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
 SPEED: Here you can set the speed value.
SN PRESET DWELL SPEED
01 000 005 013
02 000 005 013
03 000 005 013
04 000 005 013
05 000 005 013
06 000 005 013
07 000 005 013
BACK EXIT
TOUR NO： ：1
TOUR SETTING
DELETE TOUR
CALL
STOP
BACK EXIT