User Manual

19
PRESET
AUTO PAN
AUTO SCAN
TOUR
PATTERN
IDLE FUNCTION
TIME TASK
NEXT PAGE
BACK EXIT
PRESET NO ：1
TITLE ：PRESET 1
SETTING
CALL
BACK EXIT
PRIVACY MASKING
PTZ SPEED : 3
SET ZERO
POWER UP
MENU PASSWORD
MENU IDLE TIME : OFF
PTZ AUTO STOP : 15S
SELF DIAGNOSIS ADJUST
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can
see the above interface.
 PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.
 AUTO PAN: Move the cursor to PAN and then click confirm button to go to the third submenu.
 AUTO SCAN: Move the cursor to SCAN and then click confirm button to go to the third submenu.
 TOUR: Move the cursor to TOUR and then click confirm button to go to the third submenu.
 PATTERN: Move the cursor to PATTERN and then click confirm button to go to the third submenu.
 IDLE FUNCTION: Move the cursor to IDLE FUNCITON and then click confirm button to go to the third
submenu.
 TIME TASK: Move the cursor to TIME TASK and then click confirm button to go to the third submenu.
 NEXT PAGE: It includes: PRIVACY MASKING, PTZ SPEED, SET ZERO, POWER UP, MENU
PASSWORD, MENU IDEL, and PTZ AUTO STOP ETC.
Move the cursor to the item and then click the confirm button to display other function settings.
 PRIVACY MASKING: It is to set the speed dome privacy masking, including level-three menu, move the
cursor to the item, click “confirm” button to go to next menu.
 PTZ SPPED: It is to set PTZ speed, click “left”, “right” button to set.
 SET ZERO: After PTZ moves to the zero location which is to be set, then click “OK” button to complete
setting.
 POWER UP: It is to set speed dome power up, click “OK” to go to next menu to set.
 MENU PASSWORD: It is to set the speed dome menu password, click “OK” to go to next menu to set.
 MENU IDLE TIME: The menu is on and the setting of the item is not “OFF”, then it will exit menu
automatically if there isn’t any operation to the menu during the set time.
OFF means it displays speed dome menu all the time. Click “left”, “right” button to set.
 PTZ AUTO STOP: When the speed dome didn’t receive control command to the PTZ, it will stop PTZ
operation automatically when it reaches the set time, including several setting items.
Click “left”, “right” button to set.
 SELF DIAGNOSIS ADJUST: It is to set speed dome self diagnosis correction, click “left’, “right” button
to set “on/off” (it is valid after speed dome reboots)
 BACK: Move the cursor to the item, click “OK” to go back to previous menu.
 EXIT: Log out system menu.
4.4.4.1 Preset Setup