User Manual

 DEFOG MODE: It is to set camera defog mode. It includes: manual/auto/off and etc. Please use the

left/right button on the keyboard or in the speed dome terminal menu to set.

 INTENSITY: It is valid when the defog mode is manual. Please use the left/right button on the keyboard

or in the speed dome terminal menu to set.

 LIGHT INTENSITY MODE: It is to set air light intensity mode. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set.

 LIGHT INTENSITY LEVEL: It is to set air light intensity value. It is valid when the air light intensity mode

is manual. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

 BACK: Go back to previous menu.

 EXIT: Log out system menu.

4.4.3.8 Next Page Setting

Move the cursor to NEXT PAGE and then click confirm button, you can go to the level 3 menu to set

corresponding parameters.

 APERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the

keyboard or in the speed dome terminal menu to set.

 APERTURE RESTRAIN: System can auto reduce the aperture to lower the video noise when it is in low

illumination environment.

 DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.

 DZOOM LIMIT: Here you can set the threshold of the digital zoom.

 PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in the

speed dome terminal menu to set.

 FREEZE FUNCTION: This function allows the system from one preset to another preset, without

showing the video during the PTZ movement. There are two options: on/off. Please use the left/right

button on the keyboard or in the speed dome terminal menu to set.

 STABLE : it is to reduce the effect of the vibration on the camera

 CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm

button to restore factory default setup.

 CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the

camera.

 BACK: Go back to previous menu.

 EXIT: Log out system menu.

4.4.4 Function Setting

APERTURE SETTING : 11

APERTURE RESTRAIN LEVEL : 3

DIGITAL ZOOM : OFF

DIGITAL ZOOM LIMIT :

PICTURE FLIP : OFF

FREEZE FUNC : OFF

STABLE : OFF

BACK EXIT

CAMERA FACTORY DEFAULT

CAMERA RESTART

BACK EXIT