Manualshelf

User Manual

ManualsBrandsICRealtime ManualsPTZ Cameras2 Megapixel Outdoor Starlight Laser PTZ Network Camera, 45x Lens
21222324252627282930
16
DAY/NIGHT MODE ：PHOTORESISTANCE
DAY/NIGHT TYPE : MECHANISM
DAY TIME ：00H 00M
NIGHT TIME ：00H 00M
SENSITIVITY ： 5
SAVE
BACK EXIT
FOCUS MODE ：AUTO
FOCUS LIMIT ：10CM
FOCUS SENSITIVITY: ：FAULT
ZOOM TRACKING : OFF
LASER FOCUS CORRECTION ：AUTO
BACK EXIT
DETECTION SENSISIVITY: It is to set WDR detection sensitivity. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
SHADOW CORRECTION: It is to set video shadow correction level. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
MOVEMENT COMPENSATION: it is to set the camera movement compensation, click the left and right
direction on the keyboard or the left and right button on the terminal menu to set “on/off”.
BACK: Move the cursor to the item, click “OK” button to go back to previous menu.
EXIT: Log out system menu.
4.4.3.4 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the 3-layer menu to
set corresponding parameters.
DAY/NIGHT: It is to set camera day/night switch mode. It includes:
Photosensor/auto/schedule/color/B&W. Please use the left/right button on the keyboard or in the speed
dome terminal menu to set.
DAY/NIGHT TYPE: It is to set the camera day/night type, it includes: mechanism, electronic. Click ‘left”,
“right” button to set.
DAY TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY TIME
item and then click confirm button to go to setup. Please user up/down button to set the value. After
completed setup, please click confirm button to exit and move the cursor to Save button to save current
setup.
NIGHT TIME: Current setup becomes valid when day/night mode is Time. Move the cursor to DAY
TIME item and then click confirm button to go to setup. Please user up/down button to set the value.
After completed setup, please click confirm button to exit and move the cursor to save button to save
current setup.
SENSITIVITY: It is to set the sensitivity of DAY/NIGHT.
SAVE: This button is for DAY TIME and NIGHT TIME setup. After you set the day time (or night time),
you need to move the cursor here and then click confirm button to save current time setup. For other
setups, you do not need to use this button.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.3.5 Focus Setup