User Manual

15
WDR MODE ：OFF
DETECTION SENS ：LOW
SHADOW CORRECTION ：MID
MOVEMENT COMP : OFF
BACK EXIT
 SLOW AE: In the strong light environment, you can lower the camera exposure speed to capture the
image and enhance the definition. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
 BLC: It is adjust the camera brightness, the camera makes brightness compensation automatically to
darker target when it is exposed to strong light background, and adjust the background with strong light,
click “left”, “right” button to set.
 NEXT PAGE: It includes SLOW SHUTTER, AUTO SLOW SHUTTER LIMIT, AUTO GAIN LIMIT, 2DNR,
CAMERA 3DNR, EXPOSURE RESTRAIN, AUTO EXPOSURE RECOVERY, WDR SETTING.
Move the cursor to the item, click “OK” button to display other exposure setting items.
 SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure time to
capture the image and enhance the definition. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
 AUTO SLOW SHUTTER LIMIT: it is to set auto slow shutter limit, click “left”, “right” button to set.
 AUTO GAIN LIMIT: It is to set auto gain limit, click “left”, “right” button to set.
 HIGH GAIN: it is to set camera high gain, click “left’, “right” button to set.
 NOISE REDUCTION: There may be noise when the camera is monitoring the low illumination
environments. You can use the digital filter to process the noise to guarantee the clear video.
 3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. There is the fourth menu.
Please move the cursor to highlight current item and then click the OK button to go to the next level
menu.
 EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects the video
quality. Please click the left/right button to set.
 NEXT PAGE: It includes SLOW SHUTTER, AUTO SLOW SHUTTER LIMIT, AUTO GAIN LIMIT, 2DNR,
CAMERA 3DNR, EXPOSURE RESTRAIN, AUTO EXPOSURE RECOVERY, WDR SETTING.
Move the cursor to the item, click “OK” button to display other exposure setting items.
 BRIGHTNESS RESTRAIN: It is to set the brightness restrain of the camera, click “left”, “right” button to
set.
 AE RECOVERY: Manually click the “+” and “-“button on the PTZ interface, system cam resume
previous exposure value after specified time (The exposure value does not resume if this function is
off.).
 WDR SETTING: It is an abbreviation for wide dynamic region. Please make sure your camera supports
current function. This function can adjust the video brightness when the contrast between the strong
light and the dark light is too high. There is the fourth menu. Please move the light to highlight current
item and then click the OK button to go to the next level menu.
 BACK: Go back to previous menu.
 EXIT: Log out system menu.
4.4.3.3 WDR
Move the cursor to WDR and then click confirm button, you can go to the 4-layer menu to set corresponding
parameters.
 WDR MODE: It is to enable or disable WDR function. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.