User Manual

14
 CAMERA FACTORY DEFAULT: move the cursor to the item, click “OK” button to restore camera
factory default.
CAMERA RESTART: move the cursor to the item, click “OK” button to restart the camera.
 BACK: Go back to previous menu.
 EXIT: Log out system menu.
4.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can go to the submenu.
 WHITE BALANCE MODE: Set white balance adjustment mode. There are several modes such as auto,
auto trace white balance, indoor, outdoor, and manual and etc. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
 R GAIN: Before you set R GAIN option, please note the mode shall not be auto. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
 B GAIN: Before you set B GAIN option, please note the mode shall not be auto. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
 BACK: Go back to previous menu.
 EXIT: Log out system menu.
4.4.3.2 Exposure Setting
 AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/iris priority/shutter
priority.
o Auto: The gain, iris and shutter is under auto setup mode
o Manual: You need to set gain, iris and shutter manually.
o Iris priority: You can set iris manually. Gain and shutter is under auto setup mode.
o Shutter priority: You can set shutter manually. Gain and iris is under auto setup mode.
o Click “left”, “right” button to set.
 GAIN SETTING: It is to set camera gain. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
 SHUTTER: It is to set camera shutter speed. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
 IRIS SETTING: It is to set camera iris value. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
 EXPOSURE COM: It is to set camera exposure compensation. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
WB MODE ： AUTO
R GAIN ： 80
B GAIN ： 80
BACK EXIT
AE MODE ： AUTO
GAIN SETTING ： 2
SHUTTER SETTING ：1/50
IRIS SETTING ：11
EXPOSURE COMP ： 08
SLOW AE ： 1
BLC ：ON
NEXT PAGE
BACK EXIT
SLOW SHUTTER : ON
AUTO SLOW SHUTTER
LIMIT ：1/25
AGC GAIN LIMIT ：3
HIGH GAIN ：OFF
NOISE REDUCTION ： 2
3D NOISE REDUCTION : OFF
EXPOSURE RESTRAIN : OFF
NEXT PAGE
BACK EXIT
BRIGHTNESS RESTRAIN : 50
AE RECOVERY : 15Min
WDR SETTING
BACK EXIT