Quick Start Guide

2B. RESTORE FACTORY DEFAULTS/ INSTALL SD CARD

Important: Make sure the device is powered when attempting to press

RESET button.

Step 1 Use the supplied hex wrench to remove camera cover. Skip to

Step 3 if only installing SD card.

Step 2 Slightly press the RESET button for 15-30 seconds to

complete the reset function. See Figure 2-8. The camera will reboot

when the reset process is complete.

MARGIN

GUIDES

Stay within the yellow

box. Do not let text go

beyond, instead move

to the next column or

start a new page.

5 | www.icrealtime.com

Figure 2-8

Step 3 (If installing SD Card) Adjust the Micro SD Card to a proper

direction shown in Figure 2-8.

Step 5 Tighten down locking screw and reinstall camera.

Figure 3-1

3A. OVERVIEW

The IP Conﬁg tool is used to search the local network for IC Realtime

devices as well as modify the IP addresses and upgrading ﬁrmware.

This software can be downloaded at:

https://icrealtime.com/downloads under Desktop Utility Apps

3B. OPERATION

Double click the “ConﬁgTools.exe” icon to run. The interface will be

displayed as shown in Figure 3-1. Click on the blue circle icon with

the two arrows to refresh and scan the network.