Quick Start Guide

2D. RESTORE FACTORY DEFAULTS AND SD CARD INSTALLATION

Important: Make sure the device is powered when attempting to press

RESET button.

Step 1 You will need to loosen the camera base to rotate the camera

body. Please refer Figure 2-1 for SD card and reset button location.

MARGIN

GUIDES

Stay within the yellow

box. Do not let text go

beyond, instead move

to the next column or

start a new page.

5 | www.icrealtime.com

Figure 2-1

Step 2 Slightly press the RESET button for 15-30 seconds to

complete the factory reset. The camera will reboot.

3A. OVERVIEW

The IP Conﬁg tool is used to search the local network for IC Realtime

devices as well as modify the IP addresses and upgrading ﬁrmware.

This software can be downloaded at:

https://icrealtime.com/downloads under Desktop Utility Apps

3B. OPERATION

Double click the “ConﬁgTools.exe” icon to run. The interface will be

displayed as shown in Figure 3-1. Click on the blue circle icon with

the two arrows to refresh and scan the network.

● Make sure the network camera is connected to the network

and powered properly.

Figure 3-1