Quick Start Guide

MARGIN
GUIDES
Stay within the yellow
box. Do not let text go
beyond, instead move
to the next column or
start a new page.
4 | www.icrealtime.com
Step 5 Secure the camera by turning the locking screw to the locked
position. See Figure 2-5.
Figure 2-5
2B. Quick Release Removal
To remove the camera from the base, set the locking screw to unlock
position, then push down on the locking tab as you turn the camera
base. See Figure 2-6.
Figure 2-6
Figure 2-7
2C. Waterproofing Connectors
For outdoor installations, waterproofing with the included connectors
is necessary. See Figure 2-7 for installation steps.