Quick Start Guide

MARGIN
GUIDES
Stay within the yellow
box. Do not let text go
beyond, instead move
to the next column or
start a new page.
5 | www.icrealtime.com
2A. INSTALLATION STEPS
Step 1 Use the included position map and drill the appropriate
mounting holes and cable exit, if necessary. Keep in mind to line up
the locking tabs on the base for disassembly. See Figure 2-1
Step 2 Install the base mount, lining up with the locking tab position.
See Figure 2-2.
Figure 2-1
Figure 2-2
Figure 2-3
Figure 2-4
Step 3 Install the camera to the base, lining up the locking tab position..
See Figure 2-3.
Step 4 Connect the cables to the pigtail of the camera. Make sure the
looking tab is set to the downwards position to to secure the base as
shown in Figure 2-4.