Quick Start Guide

Version 1.0.0
Quick Start Guide
FLOODER
Know your Flooder
Quick Start Guide ×1
Flooder Camera ×1 Mounting Hardware ×1Mounting Plate ×1
Mounting Screw ×1
Bracket Screws ×4 Wire Nuts ×3
Assembly
Junction Box
(not included)
Mounting
Plate
Bracket
Screws
Mounting
Screw
Locking
Camera Collar
Application
Installation Hook ×1
33 feet (10m)
10 feet (3m)
With the Flooder Camera installed at 10 feet
(3m) from the ground, the PIR motion
sensor is capable of detecting humans up to
33 feet (10m). For consistent detection, the
PIR motion sensor should be parallel with
the ground.
FloodlightFloodlight
Build-in Mic
Lens
LED Indicator
PIR Motion
Sensor
What’s in the Box
If a camera reset is needed, press and hold the reset button for 10 seconds. Note:
LED Indicator Status
Green light flashing
Green light on
Red light flashing
Green and Red light flashing
- Flooder is powered off
- Rebooting after reset
- Powering on
- Device malfunction
- Waiting for network
- Operating properly
- Network connection failure
Off
Red light on
- Firmware update in progress
Micro SD
Card Slot
Reset
Button
Built-in
Speaker
Day / Night
Sensor
Device Status