Owners manual

TPD/VPD Series HMI Device User Manual

Step 8: Verify that the information for M-7060 module is correct (e.g., the Device Name, Net ID,

Tag Name, IO Type, Start Address and Default Value, etc.) and then click the “OK” button to save the

configuration and close the “Devices” dialog box.

 For more detailed information regarding the Self-test process, which is used to confirm that

the M-7060 and TouchPAD are operating correctly, refer to FAQ: How can the M-7060 be

accessed using a TouchPAD.

 If you use a third-party Modbus RTU Slave device, refer to FAQ: How do I access a third-party

Modbus RTU slave device using a TouchPAD for more detailed information.