Owners manual

TPD/VPD Series HMI Device User Manual

Step 3: Select “M-7000” from the “Device Series” drop down menu.

Step 4: Select “Create New…” from the “Connection” drop down menu to open the “New/Edit

Connection…” dialog box.

Step 5: In the “New/Edit Connection…” dialog box, configure the connection information of the

M-7060 module in the following manner:

1. Enter a name for the connection (e.g., SER_1) in the “Connection Name” field.

2. Select “COM1” from the “Connection Interface” drop down menu.

3. Select the Baud Rate of the M-7060 module (e.g., 9600) in the “Baud Rate” drop down menu.

4. Select the Data Format of the M-7060 module (e.g., 8, None, 1) in the “Data Bit”, “Parity” and

“Stop Bit” drop down menu.

5. Click the “OK” button to save the configuration and close the dialog box.