Owners manual

TPD/VPD Series HMI Device User Manual
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. Page: 69
3.4.3 Setup USB-downloaded Devices
The TouchPAD Series models listed below use USB Port to download the HMIWorks-built
applications into TouchPAD:
 TPD-280U
 TPD-283U
 TPD-430/430-EU
 TPD-433/433-EU
 TPD-432F/433F
 VPD-130/130N
 VPD-132/132N
 VPD-133/133N
 VPD-142/142N
 VPD-143/143N
3.4.3.1 Applications are downloaded through USB Port
 The following flow chart describes the USB-downloaded devices.
Design user
interface and
program
Plug in the USB
Cable
Rotary Swith set
to 9
Reset Button or
Power off then on
Download the
Prgoram
Run (F9)
Rotary Swith set
to 0
Reset Button or
Power off then on
Program run on
TouchPAD