Owners manual

TPD/VPD Series HMI Device User Manual

Step 8: Verify that “Host IP Address” and “TouchPAD IP Address” in the same subnet.

Step 9: Verify that “TouchPAD MAC Address” must match the MAC Address of your TouchPAD

device, and click the “OK” button.

Note: Verify that the new project has been created (see Section 3.2 “Create a New Project in

the HMIWorks”).

Step 10: Click the “Run (Build &

Download) F9” item from the

“Run (Build & Download)” menu,

or press F9.

Note: You can find the MAC

address on the back of the TouchPAD