Owners manual

TPD/VPD Series HMI Device User Manual

Step 7: In the “Setup Ethernet Device” dialog box, select the “DHCP”, “Static IP” or “Runtime

Setting” (e.g., DHCP) in the “IP Address Assignment Method” field.

Notes:

1. When using “Static IP” or “DHCP”, the IP settings are stored as a part of the program image,

and only successful downloading can update the IP settings.

2. When using “Runtime Setting”, the program image has no information about the IP settings,

and TouchPAD loads the IP information from the flash at the runtime. Before IP settings are

used, be sure to set the IP settings into the flash by the related API functions. We have demo

to do this as well.