Owners manual

TPD/VPD Series HMI Device User Manual
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. Page: 53
3.3 Supply Power to the TouchPAD
The power supply is divided into two kinds, namely Ethernet power supply (PoE) and DC power
supply. The detailed wiring information is as follows:
3.3.1 DC Power Supply
Step 1: Connect the External Power Supply (+24 V) to the VDC pin on the TouchPAD device.
 TPD-280-H/283U-H/280-Mx/283U-Mx/703/703-64 and VPD-13x/14x Series models
power supply can range from +12 to +48 V
DC
.
 TPD-280/280U/283U/430/430-EU/433/433-EU/432F/433F Series models power supply
can range from +10 to +30 V
DC
.
Step 2: Connect the External Power Supply GND to the GND pin on the TouchPAD device.