Owners manual

TPD/VPD Series HMI Device User Manual

PoE and Ethernet RJ-45 Jack (for TPD-433/433-EU only)

The TouchPAD device is equipped with an RJ-45 jack that is used as the 10/100 Base-TX

Ethernet port and features networking capabilities. When an Ethernet link is detected

and an Ethernet packet is received, the Act LED (Green) indicator will be illuminated.

When power is supplied via PoE (Power-over-Ethernet), the PoE LED (Orange) indicator

will be illuminated.

Reset Button (Left had Side)

Use a flat-head screwdriver to press this button to reset the TouchPAD device. Note: The reset

button does not behave as a reboot to the whole system, only resets the microcontroller and this is

not enough to make the program downloading successful. Always cut the power then turn it on

before downloading programs.