Owners manual

TPD/VPD Series HMI Device User Manual
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. Page: 21
2.1.3 TPD-430/433 Series Models
Models supported include TPD-430, TPD-430-EU, TPD-433 and TPD-433-EU.
1.
Programmable LED Indicator
2.
4.3” TFT LCD with Touch Panel
3.
Speaker for TPD-430/430-EU only; Buzzer for TPD-433/433-EU only
4.
Headphone Jack (for TPD-430/430-EU only)
5.
Rotary Switch (0 ~ 9)
The Rotary Switch is used to set the configuration modes, as follows:
0. Run: This mode is used to run the application. (There is only one application on a
TouchPAD device.)
1. Update OS: This mode is used to update operating system of TouchPAD device.
9. Update AP: This mode is used to download an application to TouchPAD device.
(There is only one application on a TouchPAD device.)
6.
USB Port
The USB Port is used to downloading application programs.
7.
Power/GND/RS-485 Connector
The TouchPAD device is equipped with a removable terminal block connector is
designed for easy and robust wiring. For more detailed information regarding the pin
assignments, refer to Section 2.2.1 TPD-280/283/430/433 Series Models.








