Owners manual

TPD/VPD Series HMI Device User Manual
Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved. Page: 17
2. Hardware Information
This chapter provides a detailed description of the appearance, dimensions, pin assignments,
mount the hardware for the TPD/VPD series product.
2.1 Appearance
2.1.1 TPD-280/283 Series Models
Models supported include TPD-280, TPD-280U, TPD-280-H, TPD-283, TPD-283U, TPD-283-H and
TPD-283U-H.
1.
2.8” TFT LCD with Touch Panel
2.
Power/GND/RS-485 Connector (for TPD-280/280U/280-H/283U/283U-H only)
The TouchPAD device is equipped with a removable terminal block connector is
designed for easy and robust wiring. For more detailed information regarding the pin
assignments, refer to Section 2.2.1 TPD-280/283/430/433 Series Models.
3.
Rotary Switch (0 ~ 9)
The Rotary Switch is used to set the configuration modes, as follows:
 For TPD-280/280-H:
0. Run Only: This mode is used for running programs.
1. Update Only: This mode is used for updating programs.






