User Manual

7000 Bus Converter User’s Manual (Version 1.8 Jan/2006, 7PH-006-18) --------------- 31
3.1.4 Verifying the Installation:
This section will show you on how to verify whether the I-7560 was
properly installed. You will also need to determine the COM port
assignment made by Windows for the USB to RS-232 converter.
Note: Before you connect the I-7560 for the first time, ensure that you do
not attach any serial devices to the converter. You must only connect the
I-7560 itself.
To verify whether the device is properly installed and determine the COM
port assignment for the device:
1. Click “Start” Æ “Settings” Æ “Control Panel”, then double click on the
“System” icon. Once the System Properties window is display, click on
” Hardware” tab and then click on the “Device Manager” button. Double-
click on Ports (COM & LPT). If the device was correctly installed, you
should now see the I-7560 USB-to-RS232 (COM3) device listing. This
also means that Windows has assigned the device to the COM3 port.